Official system integrator LENZE in Latvia.
Official partnershiper RLS in Baltic countries.
+371 26 44 21 67

    Feedback form

    Contact us

    Your message has been sent sucessfully

    Rotary miniature encoders

    RMB29 ROTARY MAGNETIC MODULE

    pdfRMB29 ROTARY MAGNETIC MODULE

    The RMB29 analogue encoder module is designed for direct integration to high volume OEM applications. The low cost 29 mm square PCB is provided with a connector for easy installation.
    The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give one sine/cosine wave per revolution.
    The RMB29 can be used in a wide range of applications including motor control and industrial automation.
     
    RMB28 ROTARY MAGNETIC MODULE

    pdfRMB28 ROTARY MAGNETIC MODULE

    The RMB28 encoder module is designed for direct integration to high volume OEM applications. The low cost 28 mm square PCB can also be provided with a connector for easy installation. The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute, incremental, analogue or linear formats.
    The RMB28 can be used in a wide range of applications including motor control and industrial automation.
     
    RMB30 ROTARY MAGNETIC MODULE

    pdfRMB30 ROTARY MAGNETIC MODULE

    The RMB30 encoder module provides the functionality of the RM36 encoder in a compact component format for simple customer integration. With a large range of outputs and both 5 V and 24 V power supply variants the unit is easily integrated to existing electronics.
    The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute, incremental, analogue or linear formats.
    The RMB30 can be used in a wide range of applications including marine, medical, print, converting, industrial automation, metal working, motor control and instrumentation.
     
    RMB20 ROTARY MAGNETIC MODULE

    pdfRMB20 ROTARY MAGNETIC MODULE

    The RMB20 encoder module provides the functionality of the RM22 encoder in a compact component format for simple customer integration. With a PCB diameter of only 20 mm the module fits into miniature designs.

    The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is sensed by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute, incremental, analogue or linear formats.

    The RMB20 can be designed into equipment used in a wide range of applications including marine, medical, print, converting, industrial automation, motor control and instrumentation.

     
    RMB14 ANGULAR MAGNETIC ENCODER MODULE

    pdfRMB14 ANGULAR MAGNETIC ENCODER MODULE

    The RMB14 is compact, absolute, high-speed encoder module. With a PCB diameter of only 14 mm the module fits into miniature designs.
    The encoder module consists of a magnetic actuator and a separate sensor board. Rotation of the magnetic actuator is read by a custom encoder chip mounted on the sensor board, and processed to give the required output format. Output signals are provided in industry standard absolute and incremental formats.
    The RMB14 can be used in a wide range of applications including robotic grippers, marine, medical, print, converting, industrial automation, motor control and instrumentation.
     
    RM08 SUPER SMALL NON-CONTACT ROTARY ENCODER

    pdfRM08 SUPER SMALL NON-CONTACT ROTARY ENCODER

    The RM08 is a compact, super small high-speed rotary magnetic encoder designed for use in harsh environments. The noncontact two part design removes the need for seals or bearings ensuring longterm reliability and simple installation.
    The encoder consists of a magnetic actuator and a separate encoder body. Rotation of the magnetic actuator is sensed by a custom encoder chip within the body, and processed to give incremental, SSI or linear voltage outputs.
    The encoder chip processes the signals received to provide resolutions to 12 bit (4,096 counts per revolution) with high operational speeds. The compact encoder body is just 8 mm in diameter and provides dirt immunity up to IP68.
    The RM08 encoder has been designed for direct integration to high volume OEM applications and can be used in a wide range of applications including motor control and industrial automation.
     
    ROLIN™ ROTARY INCREMENTAL MAGNETIC ENCODER SYSTEM

    pdfROLIN™ ROTARY INCREMENTAL MAGNETIC ENCODER SYSTEM

    The RoLinTM component level encoder system consists of an RLM readhead and a magnetised ring. The actuator is a periodically magnetised ring with a pole length of 2 mm. Radial or axial reading of the ring is possible. The readhead can ride at up to 0.4 mm from the ring's surface.
    State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature range.
    The electronics inside the readhead enable high interpolation rates up to 13 bits and fault monitoring. The incremental outputs are re-timed to the chosen minimal edge separation time (from 0.12 µs). The position information is output in incremental quadrature format with the option of a unique or periodic reference mark (every pole).
    A wide range of resolutions to 753,664 cpr is available.The maximum speed depends on the chosen resolution and minimum edge separation time, to 4 m/s at 1 µm and to 40 m/s at 10 µm.
     
    RLB ROTARY MINIATURE PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    pdfRLB ROTARY MINIATURE PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    RLB is a PCB level incremental encoder sensor system consisting of a PCB sensor and a magnetised ring. It has been designed for embedded motion control applications as a position control loop feedback element in space constraint applications.
    The information carrier is a periodically magnetised scale with 2 mm pole length. Radial or axial reading of the ring is possible. The readhead can ride at up to 0.4 mm from the ring's surface.
    State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature ranges. The position information is output in incremental quadrature format with the option of a periodic reference mark (every pole).
    The maximum speed depends on the chosen resolution and minimum edge separation time, to 4 m/s at 1 µm and to 40 m/s at 10 μm.
     
    RLC2IC MINIATURE ROTARY PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    pdfRLC2IC MINIATURE ROTARY PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    RLC2IC is a PCB level incremental encoder sensor system consisting of a PCB sensor and a magnetised ring. It has been designed for embedded motion control applications as a position control loop feedback element in space constraint applications.
    The information carrier is a periodically magnetised ring with a pole length of 2 mm. Radial or axial reading of the ring is possible. The readhead can ride at up to 0.4 mm from the ring's surface.
    State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature ranges. The position information is output in incremental quadrature format with the option of a periodic reference mark (every pole).
    The maximum speed depends on the chosen resolution and minimum edge separation time, to 7.5 m/s at 1 µm and to 75 m/s at approx. 10 μm
     
    RLC2HD MINIATURE ROTARY PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    pdfRLC2HD MINIATURE ROTARY PCB LEVEL INCREMENTAL MAGNETIC ENCODER

    RLC2HD is a PCB level incremental encoder sensor system consisting of a PCB sensor and a magnetised ring. It has been designed for embedded motion control applications as a position control loop feedback element in space constraint applications.
    The information carrier is a periodically magnetised ring with a pole length of 2 mm. Radial or axial reading of the ring is possible. The readhead can ride at up to 0.4 mm from the ring's surface.
    State of the art position sensing assures highly repeatable position measurement under wide installation tolerances and temperature ranges. The position information is output in incremental quadrature format with the option of a periodic reference mark (every pole).
    The maximum speed depends on the chosen resolution and minimum edge separation time, to 7.5 m/s at 1 µm and to 75 m/s at approx. 10 μm.
    The RLC2HD is a moisture sensitive device. It should be soldered immediately after the transportation packaging has been opened. If not, baking procedure should be performed.
    © 2006 - 2020 Lense-Service. All Rights Reserved.
    Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.